Other – Arla https://arlaplast.com/cs/ Mon, 16 Oct 2023 11:06:06 +0000 cs hourly 1 https://wordpress.org/?v=6.5.5 https://arlaplast.com/wp-content/uploads/2021/08/cropped-arla-fav-192x192-1-150x150.png Other – Arla https://arlaplast.com/cs/ 32 32 Chairmat https://arlaplast.com/cs/products/chairmat-2/ Thu, 27 May 2021 05:40:21 +0000 http://arlaplast.com/products/chairmat-2/ CHAIRMAT™ are made of Polycarbonate for maximum strength. Polycarbonate is an environmentally friendly material that is 100% recyclable and are also free from smell and do not contain any PVC. Polycarbonate does also have higher temperature resistance compared to PVC, which makes it suitable for floor heating and gives less risk for burn marks of cigarettes, ashes etc. To avoid sliding, the chairmats either are equipped with an anti-slip bottom surface for floors or with spikes for carpets. To make a perfect fit, chairmats can be ordered in different colours and in different sizes.

]]> POLYCARBONATE OPAQUE ATECH® 7000R https://arlaplast.com/cs/products/polycarbonate-opaque-atech-7000r/ Mon, 02 Aug 2021 14:50:01 +0000 http://arlaplast.com/products/recycled-pc/ Range of opaque coloured polycarbonate sheets. The product is virtually unbreakable with extremely high impact resistance. The product offers high temperature performance too. Recycled PC is mainly extruded in black colour for thermoforming purposes. The sheet has a base regrind material which is then covered with a co-extruded top layer as in our MAKROTECH® range. Carbon black offers excellent UV absorbance which projects the material for outdoor applications. The product offers good cost savings versus performance.

]]> ATECH® 3400 https://arlaplast.com/cs/products/atech-3400/ Thu, 27 May 2021 05:09:55 +0000 http://arlaplast.com/products/atech-3400/ ABS ATECH® 3400 is a series of sheets based on ABS which is a raw material with very high impact-strength. ABS also has impressive thermal qualities and is easy to thermoform and fabricate. The ABS ATECH® 3400 is a super high impact ABS with a matt colored PMMA top layer

RECYCLING Our total recycling concept (TRC), is a major advantage in todays environmentally friendly market. The TRC concept covers all types of sheets to provide you with cost saving. Off-cuts from the sheets can be used in production of new sheets by co-extruding virgin material as the top layer. Care is taken that all quality requirements are met.

]]> PC/ABS ATECH® 5103 https://arlaplast.com/cs/products/pc-abs-atech-5103/ Tue, 25 May 2021 13:25:35 +0000 http://arlaplast.com/products/atech-5103/ ATECH® 5103 is a series of sheets based on PC/ABS meeting the latest homologation to ECE R118 annex 6-7-8 for interiour in public vehicles such as busses

RECYCLING Our total recycling concept (TRC), is a major advantage in todays environmentally friendly market. The TRC concept covers all types of sheets to provide you with cost saving. Off-cuts from the sheets can be used in production of new sheets by co-extruding virgin material as the top layer. Care is taken that all quality requirements are met.

]]> PC/ABS ATECH® 5100 https://arlaplast.com/cs/products/pc-abs-atech-5100/ Tue, 25 May 2021 13:23:31 +0000 http://arlaplast.com/products/atech-5100/ ATECH® 5100 (50/50) is PC/ABS sheet coextruded with Matt ABS layer. The product offers good impact strength and wide working temperature range. ATECH® 5100 has good chemical resistance to most common chemicals and offers better fire performance than ABS.

RECYCLING Our total recycling concept (TRC), is a major advantage in todays environmentally friendly market. The TRC concept covers all types of sheets to provide you with cost saving. Off-cuts from the sheets can be used in production of new sheets by co-extruding virgin material as the top layer. Care is taken that all quality requirements are met.

]]> ABS ATECH® 3300 https://arlaplast.com/cs/products/abs-atech-3300/ Mon, 02 Aug 2021 14:57:07 +0000 http://arlaplast.com/products/atech-3300/ ABS ATECH® 3300 is a series of sheets based on ABS which is a raw material with very high impact-strength. ABS also has impressive thermal qualities and is easy to thermoform and fabricate. The ABS ATECH® 3300 is a super high impact ABS with a semigloss top layer of ASA material.

RECYCLING Our total recycling concept (TRC), is a major advantage in todays environmentally friendly market. The TRC concept covers all types of sheets to provide you with cost saving. Off-cuts from the sheets can be used in production of new sheets by co-extruding virgin material as the top layer. Care is taken that all quality requirements are met.

]]> ABS ATECH® 3200 https://arlaplast.com/cs/products/abs-atech-3200/ Tue, 25 May 2021 13:15:45 +0000 http://arlaplast.com/products/atech-3200/ ABS ATECH® 3200 is a series of sheets based on ABS which is a raw material with very high impact-strength. ABS also has impressive thermal qualities and is easy to thermoform and fabricate. The ABS ATECH® 3200 is a super high impact ABS with a top layer of high gloss PMMA (acrylic).

RECYCLING Our total recycling concept (TRC), is a major advantage in todays environmentally friendly market. The TRC concept covers all types of sheets to provide you with cost saving. Off-cuts from the sheets can be used in production of new sheets by co-extruding virgin material as the top layer. Care is taken that all quality requirements are met.

]]> ABS ATECH® 3100 https://arlaplast.com/cs/products/abs-atech-3100/ Tue, 25 May 2021 13:12:25 +0000 http://arlaplast.com/products/atech-3100/ ABS ATECH® 3100 is a series of sheets based on ABS which is a raw material with very high impact-strength. ABS also has impressive thermal qualities and is easy to thermoform and fabricate. The ABS ATECH® 3100 is a super high impact matt ABS which remains matt after thermoforming.

Our total recycling concept (TRC), is a major advantage in todays environmentally friendly market. The TRC concept covers all types of sheets to provide you with cost saving. Off-cuts from the sheets can be used in production of new sheets by co-extruding virgin material as the top layer. Care is taken that all quality requirements are met.

]]> ABS ATECH® 3000 https://arlaplast.com/cs/products/abs-atech-3000/ Tue, 25 May 2021 13:10:06 +0000 http://arlaplast.com/products/atech-3000/ ABS ATECH® 3000 is a series of sheets based on ABS which is a raw material with very high impact-strength. ABS also has impressive thermal qualities and is easy to thermoform and fabricate. ABS ATECH® 3000 is a super high impact ABS with a semigloss surface that thermoforms quickly and effectively.

Our total recycling concept (TRC), is a major advantage in todays environmentally friendly market. The TRC concept covers all types of sheets to provide you with cost saving. Off-cuts from the sheets can be used in production of new sheets by co-extruding virgin material as the top layer. Care is taken that all quality requirements are met.

]]> ABS ATECH® 2000R https://arlaplast.com/cs/products/abs-atech-2000r/ Tue, 25 May 2021 13:08:26 +0000 http://arlaplast.com/products/atech-2000r/ ATECH® 2000R is a series of sheets based on regrinded ABS-material which is a material with high impact strength. ABS also has impressive thermal qualities and is easy to thermoform and fabricate. The ATECH® 2000R is an ABS with a semi-gloss surface that thermoforms quickly and effectively.

RECYCLING Our total recycling concept (TRC), is a major advantage in todays environmentally friendly market. The TRC concept covers all types of sheets to provide you with cost saving. Off-cuts from the sheets can be used in production of new sheets by co-extruding virgin material as the top layer. Care is taken that all quality requirements are met.

]]>